7" 4-LINK LIFT KIT W/ REAR BLOCKS W/ NX2 SHOCKS 23-27 S/DUTY DIESEL - BDS2252H

BDS 7" 4-LINK LIFT KIT WITH REAR BLOCK KIT AND NX2 SHOCKS | 23-27 F-270/F-350 SUPER DUTY 4WD DIESEL

• Complete bolt in installation.
• Pro-Ride dual rate springs provide superior ride quallity vs OEM springs.
• Heavy Duty 4-Link control arms offer improved handling, stability and strength.
• 4-Link suspension offers superior caster control through suspension travel.
• Improved driveability from corrected geometry and steering angles.
• Fabricated rear blocks provide a level stance from front to rear.

Important Note: Ford recommends the pitman arm nut is replaced prior to pitman arm installation. BDS-UBT4027 (Qty: 4) is required for install on a trucks with a top-mounted overload spring with an overload spacer block taller than 1-1/8". Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper. If your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS-123402. Due to the taller factory ride height, Tremor models will not net the full advertised lift height. The final ride height will be the same as standard models. Larger tires on the stock wheel are not recommended due to the brake line clearance required. Minor trimming may be necessary for clearance of 38x12.50 tires on certain wheel setups. Installation requires a torque wrench capable of 405 ft-lbs. Some trucks with a rear driveline vibration may have a recall from Ford regarding the rear