Towing (1969)

IDLER HUB ASSEMBLY 5 ON 4.5" 3500 LBS Bearing cones, seal, and grease come installed Bolt Pattern: 5 on 4.5” Stud Size:1/2” 3,500lbs weight capacity

IDLER HUB ASSEMBLY FOR 2,200-LB. AXLE - 4 ON 4"; 1/2" (FULLY ASSEMBLED) Lippert® genuine replacement part Idler Hub Assembly #141281 Bearing cones, seal, and grease come installed Axle rating:...

IDLER HUB ASSEMBLY FOR 2,200-LB. AXLE - 5 ON 4.5"; 5.5" HUB FLANGE (FULLY ASSEMBLED) Lippert® genuine replacement part Idler Hub Assembly #141280 Bearing cones, seal, and grease come installed...

IDLER HUB ASSEMBLY 5 ON 4.5" 2200 LBS Lippert® genuine replacement part Idler Hub Assembly #158530 Bearing cones, seal, and grease come installed Axle rating: 2,200 lbs. Wheel size: 12"...

CURT BASE PLATE ; 19-21 SILVERADO 1500 / 21-24 SUBURBAN Z71 / 21-24 TAHOE Z71 / 21-24 YUKON AT4 / 21-24 YUKON XL AT4 Protected by a durable high-gloss black...

4-FLAT WIRE HARNESS | 23-26 NIRO/ 23-26 NIRO EV Backed by a limited one-year warranty Dust cover included to keep connector clean when not in use Constructed with SMT circuitry...

CLASS 3 BALL MOUNT (2" SHANK, 5,000 LBS., 8" DROP, 11-1/2" LONG) Fits trailer hitches with a 2" x 2" receiver tube opening Equipped with a 1" hole to accept...

CLASS 3 BALL MOUNT (2" SHANK, 5,000 LBS., 8" DROP, 13" LONG) Fits trailer hitches with a 2" x 2" receiver tube opening Equipped with a 1" hole to accept...

LOADED BALL MOUNT WITH 2" BALL (2" SHANK, 7,500 LBS., 4" DROP) Rated to 7,500 lbs. gross trailer weight and 750 lbs. tongue weight Fits trailer hitches with a 2"...

CLASS 3 BALL MOUNT (2" SHANK, 5,000 LBS., 10" DROP, 14" LONG) Fits trailer hitches with a 2" x 2" receiver tube opening Equipped with a 1" hole to accept...

CLASS 3 BALL MOUNT (2" SHANK, 5,000 LBS., 10" DROP, 13" LONG) Fits trailer hitches with a 2" x 2" receiver tube opening Equipped with a 1" hole to accept...

CLASS 3 BALL MOUNT (2" SHANK, 7,500 LBS., 6" DROP, 12-1/4" LONG) Fits trailer hitches with a 2" x 2" receiver tube opening Equipped with a 1" hole to accept...

CLASS 3 BALL MOUNT (2" SHANK, 7,500 LBS., 2" DROP, 10-1/4" LONG) Fits trailer hitches with a 2" x 2" receiver tube opening Equipped with a 1" hole to accept...

CURT HAND-CRANK 2-SPEED WINCH 2600LBS Universal, slotted screw holes for flexible mounting Compatible replacement for most DL and Fulton winches Ideal for winching +20-foot-long boats onto boat trailer Rated for...

ACTIVELINK BALL MOUNT 2" BALL 3500 LBS GTW. Patent-pending ActiveLink design for fast, secure attachment with pin and clip ActiveLink shank #18401 or #18402 required for installation (sold separately) Unique...

ROUND SPINDLE WASHER - 1.06" ID - 2" OD #179660 Replacement round spindle washer Inside diameter: 1.06" Outside diameter: 2"

IDLER HUB FOR 2,200-LB. AXLE - 5 ON 4.5"; 6.5" HUB FLANGE, 1/2" STUDS Idler hub only (full assembly not included) Lippert™ genuine replacement part Axle rating: 2,200 lbs. Wheel...

DOUBLE LIP GREASE SEAL - 2,200-LB. BRAKE & IDLER HUB ASSEMBLIES, 1.5" ID For 2,200-lb. axle capacities Hub bore diameter: 1.983" Spindle diameter: 1-1/2" Width: 1/4" Grease application

CURT CLASS 3 HITCH WITH 2-INCH RECEIVER | 24-26 RANGER Rated to 7,500 lbs. gross trailer weight and 750 lbs. tongue weight Compatible with weight distribution hitch (8,000 lbs. WD...

IDLER HUB FOR 2,200-LB. AXLE - 5 ON 4.5"; 5.5" HUB FLANGE, 1/2" STUDS Idler hub only (full assembly not included) Lippert™ genuine replacement part Axle rating: 2,200 lbs. Bolt...